Model 50L Windmill Force Pump

ELIMINATES FALSE WELL PIT - The pump fits inside a 3-inch or larger well casing thus eliminating the undesirable, unsanitary false well pit.

DOUBLE-ACTING - Pumps water on both up and down strokes, equalizing the load and giving a steady, even flow of water.

ANTI-FREEZING - The force cylinder is located four feet down inside the well casing and is drained at the that point. This is below the frost line to eliminate the danger of freezing.

SANITARY - The well casing may be brought up above ground and securely capped and sealed against any possible pollution.

FORCE PUMP - Pump is ideal for yard use in forcing water to house and barn. Capable of working against 60 pounds of pressure; designed for extra heavy work

PERFECTED - All minor improvements in construction have been carefully worked out. The greatly improved mechanical details assure years of trouble free service.

If you need to add a pump to a well that has an existing electric pump you must use the Model 50A version of the 50L.

Proudly Made in the USA.

Locate a Dealer
Can I force water to a storage tank?

You can, but it depends on the model of pump. We have several models (including models 50L and PHB Pitcher Pump) that can be used to force water to fill a storage tank. This can be done through either a garden hose or hard piped.

Can I have both a hand pump and a submersible on the same well?

Yes, but it depends on the well casing diameter (5” minimum) and the amount of room between the pitless adaptor and the inner well casing.

How deep can I pull water from?

With our pitcher pumps, water can be pulled from around 25ft.

With our windmill pump and deep well pumps you can pull from up to 250ft.

What is Static Water Level?

Static water level is the distance between the ground and the water level in the well casing. Example: The well may be drilled 150feet deep but the water comes up within 75ft of the ground in the casing. The static water level would be 75ft.

Can I use a windmill?

Yes, several of our pumps have windmill adaptors (including models 50L and 192A).