COMPATIBLE - Can be ran in same well casing as electric pump
SIMPLE & SERVICEABLE - Easily operated and heavy cast iron construction
ANTI-FREEZING - The force cylinder is located four feet down inside the well casing and is drained at that point. This is below the frost line and eliminates risk of freezing.
SUBMERSIBLE CYLINDER PUMP COMBATIBLE - Designed to work with submersed cylinder
ADJUSTABLE - Available to mount to existing platform 4", well cap, 6" well cap or 6" 1 1/2" offset base
HEAVY DUTY - Years of operation
Proudly made in the USA.
Necessary Parts for Operation
- Part NamePart Number
- 1 1/4” Force Cup LeatherEQ150
- 1 3/8” Force Cup LeatherEQ138
- 1 11/16” Force Cup LeatherEQ100
- 1 7/8” Force Cup LeatherEQ125
- 1 1/8” Force Cup LeatherEQ130
- 1 7/8” & 1/2” Force Cup LeatherQ126
- 1 1/2” & 5/8” LeatherCL158
- 1 1/2” LeatherCL150
- 1 5/8” & 5/8” LeatherCL200
- 2” & 1 5/16” LeatherCL225
- 2 1/4” & 1 1/2” LeathersCL250
- 3” & 2” LeathersCL300
- 3 1/2” Lower Valve Leather CylinderLV300
- 3 1/4” Lower Valve Leather CylinderLV275
- 3” Lower Valve Leather CylinderLV250
- 3 1/2” & 2 1/2” LeathersCL350
- 1 13/16 x 10” Complete Cylinder450 Brass Eureka
- 2 1/2 ” x 10” Complete Cylinder442 Brass 3
- 2 1/4” x 10 Complete Cylinder442 Brass 2
- 2” x 10” Complete Cylinder442 Brass 1
- 3” x 10” Complete Cylinder442 Brass 4
Pipe - Rod - Couplings - Valves
- Part NamePart Number
- 1/2” x 1/2” Rod Coupling1/2x1/2
- 3/8” x 1/2” Rod Coupling3/8x1/2
- 3/8” x 3/8” Rod Coupling3/8x3/8
- 3/8” x 5/8” Rod Coupling3/8x58
- 3/8” x 7/16” Rod Coupling3/8x7/16
- 5/8” x 7/16” Rod Coupling5/8x7/16
- 7/16” x 1/2” Rod Coupling7/16x1/2
- 7/16” x 7/16” Rod Coupling7/16x7/16
- 3/8” Threaded Pump Rods3/8
- 1/2” Threaded Pump Rod1/2
- 7/16” Threaded Pump Rod7/16
- 1 1/2” Galv. PVC Pipe Couplings1 1/2"
- 1 1/4” Galv. PVC Pipe Couplings1 1/4"
- 1” Galv. PVC Pipe Couplings1"
- 1/2” Galv. PVC Pipe Couplings1/2"
- 1 1/4 x 6 Foot PVC Pipe Schedule 801 1/4"
- 1 1/4” Foot Valve11/4"
- Universal Check Valve15
Replacement Parts
- Part NamePart Number
- 190 Handle155
- 190 Handle BearerK-1
- ClampK
- 190 SpoutK-3
- Base, CompleteOK
- 190 Malleable Eye w/ Set ScrewK-6
- 7/16” x 1 1/2” Clevis PinB-15
- 7/16” x 2 1/2” Clevis PinB-16
- 7/16” Long Pump Rod 7/16” x 63 3/4” Stainless SteelK-10
- 1 1/4” Galvanized Pump Body 1 1/4” x 54”K-11
- Brass Cylinder 2 1/2 x 10K-12
- 6 x 1 1/4 Well Cap (190)K-14
- 4 x 1 1/4 Well CapK-14A
- 7/16” x 3/8” Rod Coupling Stainless SteelK-15
- 3/8” x 1 1/2” Bolt & NutK-16
- 4"x 1 1/4” Well Cap4114
- 5 to 6 adapter Well Cap56
- 6” 1 1/2” offset Well Cap61120
- 6” x 1 1/2” Well Cap6112
- 6” x 1 1/4 offset Well Cap61140
- 6” x 1 1/4” Well Cap6114
Leathers
- Part NamePart Number
- 1 1/4” Force Cup LeatherEQ150
- 1 3/8” Force Cup LeatherEQ138
- 1 11/16” Force Cup LeatherEQ100
- 1 7/8” Force Cup LeatherEQ125
- 1 1/8” Force Cup LeatherEQ130
- 1 7/8” & 1/2” Force Cup LeatherQ126
- 1 1/2” & 5/8” LeatherCL158
- 1 1/2” LeatherCL150
- 1 5/8” & 5/8” LeatherCL200
- 2” & 1 5/16” LeatherCL225
- 2 1/4” & 1 1/2” LeathersCL250
- 3” & 2” LeathersCL300
- 3 1/2” Lower Valve Leather CylinderLV300
- 3 1/4” Lower Valve Leather CylinderLV275
- 3” Lower Valve Leather CylinderLV250
- 3 1/2” & 2 1/2” LeathersCL350
- Install Instructions Download
You can, but it depends on the model of pump. We have several models (including models 50L and PHB Pitcher Pump) that can be used to force water to fill a storage tank. This can be done through either a garden hose or hard piped.
Yes, but it depends on the well casing diameter (5” minimum) and the amount of room between the pitless adaptor and the inner well casing.
With our pitcher pumps, water can be pulled from around 25ft.
With our windmill pump and deep well pumps you can pull from up to 250ft.
Static water level is the distance between the ground and the water level in the well casing. Example: The well may be drilled 150feet deep but the water comes up within 75ft of the ground in the casing. The static water level would be 75ft.
Yes, several of our pumps have windmill adaptors (including models 50L and 192A).